8020D Studio Monitor Dark Grey

Genelec 8020D Studio Monitor Dark Grey is a compact two-way active nearfield monitor designed for music production, editing and broadcast work where space is limited. Its 105 mm (4-inch) woofer and 19 mm (¾-inch) metal-dome tweeter each have a dedicated 50 W Class D amplifier. The die-cast aluminium bass-reflex enclosure delivers a frequency response of 56 Hz–25 kHz at −6 dB, while Genelec’s Directivity Control Waveguide (DCW™) helps maintain consistent dispersion around the listening position. A balanced XLR input connects to compatible studio equipment, and four rear-panel tone controls help adapt the monitor to its placement. The Dark Grey version, model 8020DPM, is supplied as a single monitor with an Iso-Pod™ stand.

Key features

• Two-way active nearfield studio monitor in Dark Grey
• 105 mm (4-inch) woofer and 19 mm (¾-inch) metal-dome tweeter
• Dedicated 50 W Class D amplifier for each driver
• 56 Hz–25 kHz frequency response at −6 dB
• 100 dB short-term maximum SPL at 1 m under Genelec’s test conditions
• Directivity Control Waveguide (DCW™) for controlled sound dispersion
• Die-cast aluminium bass-reflex enclosure
• Balanced analogue XLR input
• Desktop, Treble Tilt, Bass Tilt and Bass Roll-Off controls
• Iso-Pod™ isolation stand with tilt adjustment
• Intelligent Signal Sensing (ISS™) automatic standby

Overview

Included Content

• 1 × Genelec 8020D Studio Monitor, Dark Grey (8020DPM)
• 1 × 1.8 m mains cable
• 1 × Iso-Pod™ kit
• Operating manual

Creative Tools

• Build a compact stereo monitoring setup with two 8020D monitors. Place them symmetrically around your display to check centre placement, panning and stereo effects from a nearfield listening position.
• Use the Desktop switch when a desk or console surface adds emphasis around 200 Hz. The 4 dB cut helps address that placement effect before you make low-mid EQ decisions in the mix.
• Apply Bass Tilt if positioning near a wall or corner makes the low end sound too prominent. Use Bass Roll-Off when you want to reduce output at the lowest end of the monitor’s range.
• Engage Treble Tilt to gently reduce the high-frequency response if the monitoring setup sounds too bright. Compare the settings with a familiar reference track before making changes to the mix itself.
• Angle the monitor towards your ears with the included Iso-Pod™ stand. This helps when the cabinet sits below ear height and reduces vibration transfer to the work surface.
• Connect a compatible audio interface, mixer or monitor controller through the balanced XLR input. Each monitor has its own amplification and mains connection, so a stereo setup needs two line outputs and two power connections.
• Check the balance between kick and bass, the clarity of dialogue and the placement of instruments on the same compact system. Add a compatible subwoofer if your work also requires judging deep sub-bass.

Ideal For

• Home and project studios with limited desk space
• Music producers and nearfield mix engineers
• Podcast, dialogue and video editors
• Broadcast and post-production workstations
• Mobile and location recording setups
• Compact stereo systems using two 8020D monitors