8010A Studio Monitor Dark Grey

Genelec 8010A Studio Monitor Dark Grey is a compact two-way active nearfield monitor designed for desktop studios, mobile recording and broadcast setups where space is limited. A 76 mm (3-inch) woofer and 19 mm (¾-inch) metal-dome tweeter are each driven by a dedicated 25 W Class D amplifier. The die-cast aluminium enclosure measures just 195 mm high with its Iso-Pod™ stand fitted, making the monitor easy to position beside a display or carry to a location session. A balanced XLR input connects to compatible studio equipment, while rear-panel Bass Tilt and Desktop switches help compensate for placement near walls and reflective work surfaces. This Dark Grey version, model 8010AP, is supplied as a single monitor.

Key features

• Compact two-way active nearfield monitor in Dark Grey
• 76 mm (3-inch) woofer and 19 mm (¾-inch) metal-dome tweeter
• Dedicated 25 W Class D amplifier for each driver
• 67 Hz–25 kHz frequency response at −6 dB
• 96 dB short-term maximum SPL at 1 m under Genelec’s test conditions
• Directivity Control Waveguide (DCW™) for controlled sound dispersion
• Die-cast aluminium bass-reflex enclosure
• Balanced analogue XLR input with switchable −10 dB sensitivity setting
• Bass Tilt and Desktop controls for placement compensation
• Intelligent Signal Sensing (ISS™) automatic standby
• Iso-Pod™ isolation stand included for desktop placement and tilt adjustment

Overview

Included Content

• 1 × Genelec 8010A Studio Monitor, Dark Grey (8010AP)
• 1 × 1.8 m mains cable
• 1 × Iso-Pod™ kit
• Operating manual

Creative Tools

• Set up a nearfield listening position on a compact desk or editing station. The small cabinets leave room for a computer display, interface or controller while allowing two monitors to be placed symmetrically for stereo work.
• Aim each monitor towards your ears using the included Iso-Pod™. The adjustable tilt helps when the cabinet sits below ear height, and the stand reduces mechanical coupling between the enclosure and the work surface.
• Use the Desktop switch to reduce the low-mid emphasis that can result from placing the monitor on a reflective desk. Its 4 dB cut at 200 Hz gives you a starting point when playback sounds fuller on the desk than on a stand.
• Adjust Bass Tilt when the monitor sits near a wall or in a corner. The selectable settings let you reduce low-frequency output to suit the placement before making bass EQ decisions in a mix.
• Connect directly to a compatible audio interface, mixer or monitor controller through the balanced XLR input. Each cabinet has its own amplification and mains connection, so a stereo setup uses two individually powered monitors.
• Use the −10 dB input sensitivity setting if your source produces more playback level than you need at close range. This can give you more usable travel on an interface or monitor controller’s volume knob.
• Use the 8010A to check dialogue, vocal balance, edits and stereo placement. If your work regularly depends on judging deep sub-bass, add a compatible subwoofer to extend the system below the monitor’s low-frequency range.
• Take a familiar reference monitor to a location recording or temporary editing setup. At 1.5 kg per cabinet, the 8010A is practical to transport, and its onboard controls let you adapt it to the new placement.

Ideal For

• Home and project studios with limited desk space
• Music producers and nearfield mix engineers
• Podcast and dialogue editors
• Mobile recording engineers
• Broadcast and outside broadcast workstations
• Compact stereo monitoring setups using two 8010A monitors
• Anyone seeking a compact active monitor with balanced XLR connectivity